Ny Stiler RĘBAK TARCZOWY CIĄGNIKOWY BX 42S, TRACTOR WOOD CHIPPER flishugger
≈ 10.150 kr.
Sokołów Podlaski
Hvis du beslutter at købe udstyret til en lav pris, skal du sikre, at du kommunikerer med den rette sælger. Find ud af så mange oplysninger som muligt om udstyrets sælger. En måde til at snyde på, er at lade som om, du er en reel virksomhed. Hvis der opstår mistanke, skal du informere os for en yderligere kontrol ved brug af formularen til feedback.
Før du beslutter dig til at købe, skal du undersøge adskillige salgstilbud grundigt for at opnå en forståelse af den gennemsnitlige pris på dit valgte udstyr. Hvis prisen på det tilbud, du kan lide, er meget lavere end lignende tilbud, skal du tænke dig godt om. En betydelig prisforskel er muligvis tegn på skjulte defekter eller et forsøg fra sælgerens side på at svindle eventuelle købere.
Køb ikke produkter med en for lav pris i forhold til den gennemsnitlige pris for lignende udstyr.
Stol ikke på tvivlsomme løfter og forudbetalte varer. Hvis du er i tvivl, skal du ikke være bange for at bede om yderligere oplysninger. Bed om flere fotografier og dokumenter for udstyret. Kontrollér, at dokumenterne er ægte. Stil spørgsmål.
Den mest almindelige form for svindel. Uhæderlige sælgere beder eventuelt om en forskudsbetaling for at "booke" din ret til at købe udstyret. Svindlere kan således indsamle et stort beløb og forsvinde, og ikke længere kontakte dig.
- Overførsel af forudbetalingen til kortet
- Foretag ikke nogen forskudsbetaling uden dokumenter, som bekræfter pengeoverførslen, hvis sælgeren er i tvivl i løbet af forhandlingerne.
- Overførsel til mellemmandens konto
- Du skal være på vagt over for en sådan anmodning, da du højst sandsynligt har at gøre med en svindler.
- Overførsel til en firmakonto med et lignende navn
- Vær opmærksom på, at svindlere muligvis udgiver sig for at være velkendte virksomheder ved at ændre navnet en lille smule. Overfør ikke penge, hvis der er tvivl om firmanavnet.
- Erstatning af egne oplysninger på en faktura fra en reel virksomhed.
- Før du foretager en overførsel, skal du sikre, at de specificerede oplysninger er korrekte, og om de har forbindelse til den specificerede virksomhed.
Sælgerens kontaktoplysninger
+48 792 75...
Vis
+48 792 750 200
Polen 
Polen, Sokołów Podlaski
Polen, Sokołów Podlaski
Polen, Sokołów Podlaski
Polen, Sokołów Podlaski
Polen, Sokołów Podlaski
Polen, Sokołów Podlaski
Polen, Sokołów Podlaski
Polen, Sokołów Podlaski
Polen, Sokołów Podlaski
Polen, Solec-Zdrój
Polen, Podegrodzie
Polen, Słupia
Polen, Krakow
Polen, Bodzentyn
Polen, Słupia
Polen, Ostrowiec Świętokrzyski
Polen, Słupia
Colombia, Manizales
Polen, Krakow
WE INTRODUCE OUR MOST POPULAR, ORIGINAL, RELIABLE, VERY STRONG STILER BX 42S CHIPPER.
Equipped with a hook for attaching the device and height-adjustable feet
The new model has a thick disc and gear for greater strength and shredding power.
The machine is equipped with an emergency locking system for the material being drawn in.
Technical data:
Size of shredded material: 12cm in diameter (maximum 25cm with roots)
Drive system: direct drive, power take-off shaft
Rotor diameter: 63cm
Engine power: 18-50 km
Number of cutting knives: 4 + 1 counter-blade
Knife type: hardened tool steel
Rotor weight: 60 kg
Material description mechanism: manual operation
Mounting system: three-point suspension system (just behind)
Dimensions (with the batch funnel folded): 101cm x 106cm x 160cm
Batch hopper: 50 x 50 cm
Rotation of the ejection tube: 360 °
Height of discharge pipe: 160cm
Rated PTO speed at the end: 540-1000
Chipper weight: 225 kg
In the set you will receive:
Knives sharpened on both sides. This treatment will extend the life of one knife until the other.
Height-adjustable legs
Trailer tow hook
PTO shaft
Transport for free
Machine specification:
CHIP STILER BX42 for crushing branches and tree trunks up to 12 cm in diameter, next to suckers up to 25 cm.
The three-point chopper (three-point linkage) is available for cooperation with an agricultural tractor with a minimum power of 18 HP.
The drive is transmitted by the PTO shaft from the tractor PTO. The produced wood chips are thrown out through a 360 ° pipe rotated in relation to the chopper base.
A massive shield equipped with 4 knives, both sides sharpened + one versus a knife.
In addition, our shield is equipped with breakers (shovels) for additional chopped values obtained up to 20-40 mm.
The chipper is additionally equipped with blade ventilation.
The drop funnel can be folded for transport.
All available protections against dust, felling etc.
All hooks, bolts, etc. included - buy a machine prepared for work!
The rotor design allows for long-term operation without tractor instructions.
The machine is equipped with an emergency locking system for the material being drawn in.
Four knives sharpened on both sides, very high efficiency and machine life available.
The blades are made of tool steel hardness.
The machine has a counter blade mounted in the cutting chamber housing.
The back of the disc is equipped with breakers and discharge shovels for more efficient discharge of chips with machines.
The rotation is operated by a universal power take-off shaft, which is connected to a mechanical machine with a continuous shaft. The minimum required speed is up to 540 rpm.
The machine is equipped with a three-point linkage suspension system.
The new model is equipped with a simple and effective ratchet system that requires locking the material being drawn in.
Thanks to the simple technique, the system is reliable and trouble-free.
If you need to use the system, simply push the red safety lever and the steel latch will lower and lock the retractable element.
360 ° swiveling wood chips allow us to direct the stream in any direction.
The chipper has a ball hitch, so you can attach a trailer to the machine.
The folding hopper facilitates the storage and transport of machines.
The machine includes obtaining chips with dimensions from 20 mm to 40 mm.
In the additional option there is an extended 50 cm discharge funnel. For more information, please contact us.